Hello! In this tutorial i will tell you how to use the APP or Auto-Pilot Approach Hold, in order to use this button you must first set your Radio Frequency to the runway Frequency. For example if the Runway 9 Frequency is 100.01 you must set your NAV 1 to 100.01 and turn it on after that when your so close at the airport about 20nm and going thru the runway if you heard the sound of the morse code you will have to turn on the APP hold then the airplane will line up itself to the runway that you are going to land.
Please note that if you want to use APP make sure you set all of the other flight instruments for landing procedure or you can also check your Flight Checklist then look for the landing procedures.
If your using a heavy aircraft like Boeing 737-747 or an Airbus do not lower your throttle or speed because if you do you will soon going to stall and crash. Make sure you check the proper landing speed of each aircraft that you will use in order to land safely to the runway. You must keep the balance even though your activating the APP hold on the Instrument Panel.
(Soon i will add pictures/videos for each blog)
No comments:
Post a Comment